Product Detail

“TR” Doors – TEMPERATURE RISE

44 mm thick steel doors shall conform to the specification of
ANSI A 250.8-2003/HMMA 861-06/SDI 100.
“TR” doors are made full-flush or seamless type (optional). Face sheets are commercial quality cold rolled steel conforming to ASTM A1008/A 1008M-02, A653/A 653M-01 Galvanized or A666-00 Stainless Steel.
Doors are mechanically interlocked, hemmed, and vertical edges have no visible seams on faces. The core is one-piece, UL Listed, solid mineral fiber slab which is securely bonded to both face sheets under pressure with waterproof contact adhesive. The top and bottom door edges are closed inverted by 1.5 mm steel channels welded in place.

Gauges

1.25 mm/ 1.5 mm

Fire Ratings

Conforming to ANSI/NFPA 80-1999 Up to 180 mins

Hardware Provisions

Hinges preparation non handed. Hinge are mortised for 4-1/2” (Standard) or 5”, standard and heavy weight hinges, 4.5mm steel reinforcement are welded inside the door edge and are drilled and tapped for fastener in accordance with ANSI A156.7-2009. The lock edge has a square edge and is prepared for GOV series 86, 160/161 or 90 locks in accordance with ANSI A115 or Euro lock. Hardware reinforcement meet or exceeds ANSI A250.6-2003 (R2008)

Paint

Doors shall be provided one coat of oven–cured neutral color primer paint. Primer coat shall conform with ANSI A250.10-1998 (R2004) . The primer coat is preparatory base for necessary finish paint.

Suggested Use

Stairwell case

Fire Zones

 
 

© 2015 Architectural Doors Co. All Rights Reserved Sitemap |

Web desing & development ERTEKAZ