Product Detail

M SERIES frames

Steel door frames shall conform to the specification of
ANSI A 250.8-2003/HMMA 861-06/SDI 100.
M SERIES frames for 1-3/4” doors are formed from commercial quality cold rolled steel conforming to ASTM A1008/A 1008M-02, A653/A 653M-01 Galvanized or A666-00 Stainless Steel.
Door frames , side lites, transom and borrowed lites are supplied knock down (KD). Welded unit is optional with all exposed welds ground smooth. Integral door stop are 16mm high, frame faces are 50mm. Double rabbet, single rabbet, case open or kerf profiles are set to suit wall applications. Jamb anchors are available for new masonry or existing opening wall conditions.

Hardware Provisions

Frames are handed. Hinges jambs are mortised for 4.0”, 4-1/2” or 5” high, standard or heavy weight hinges. 4.5mm steel reinforcement are welded in place and are drilled and tapped for fasteners in accordance with ANSI A156.7-2009. The strike jambs is prepared for 2-3/4”, 4-7/8” universal strike in accordance with ANSI A115.1&2 or Euro strike. Plaster guard are provided. Hardware reinforcement meet or exceeds ANSI A250.6-2003 (R2008).

Paint

Frames shall be provided one coat of oven–cured neutral color primer paint. Primer coat shall conform with ANSI A250.10-1998 (R2004). The primer coat is preparatory base for necessary finish paint.

 
 

© 2015 Architectural Doors Co. All Rights Reserved Sitemap |

Web desing & development ERTEKAZ